Xenon Lamps


Manufacturers & Suppliers
Home » Products » » Lighting Bulbs & Tubes » Xenon Lamps » Lights & Lighting » CAN BUS HID Ballast
  • Product Details
  • Company Profile
CANBUS HID ballast is designed to solve CANBUS problem on vehicles. 
The Low-wattage HID bulb is designed for automotive use for quick start and hot re-strike. HID ballast follows the six operation stages of bulb: turn-on, ignition, take-over, warm-up, run-up and steady state. So HID ballast needs not only different control modes for different stages but also complicated timing control.

The main system is with the following good quality modules.
1. Low-gain low bandwidth system.
2. Powerful DSP.
3. Ignition coil with Platinum
4. MOSFET
5. Capacitance
6. Microchip

Specification:
1) Measurement: 85*70*30 mm
2) Weight: 0.37 kg
3) Length of cable: 370 mm
4) Connector: AMP
5) Input voltage:9-16V
6) Working temperature: -40 ~ 105°C.
7) Output frequency:375±75HZ
8) Max input current:6A
9) Output power(stable state): 55W
10) Max. start voltage: 23kV
11) Life time: ≥10000hrs

Performance:
1) Light output is stable within ±10.5% during the 125 to 145 second time interval.
2) At steady state, there's minimum variation in color, such as color bursts.
3) It's able to respond to momentary off times of varying periods of time after achieving steady state conditions and thermal stabilization of the bulb.
4) It meets performance specifications when supplied by primary positive input voltages varying from 9 to 18 VDC.
5) It provides over current protection.
6) The system is designed to be compatible with the electromagnetic environment generated by the motor vehicle and its equipment.
7) Immunity to radiated fields.
8) Immunity to conducted sinusoidal bursts.
9) Immunity to jump start voltages.

Strict test:
1) 120 minutes aging test
2) Connection circuit protection test
3) Over voltage protection test
4) Flash light concussion test
5) Quakeproof capability test
6) Cold boot and warm boot test
7) Polarity protection test
8) Short circuit protection test
9) EMC anti-jamming test
10) Ballast and bulb matching test



View More »
Send your message to this supplier
* From: Enter your Email
To: Rock Lee
* Message:
* Enter the code
shown on image:
The picture looks not clear? Click to get the verification code
Related Search
  • Slotlight Products
Bookmark this page Email this page Make TradeTT.com your homepage
All Offers/Products/Company Profiles/Images and other user-posted contents are posted by the user and Tradett shall not be held liable for any such content. However, Tradett respects the intellectual property, copyright, trademark, trade secret or any other personal or proprietary third party rights and expects the same from others. To see our intellectual property policy and for intellectual property rights click here.